How to Paint Motorcycle with Airbrush - Sometimes, you will definitely feel bored with the color of the motor is monotonous and that's it. Today, many workshops also provide painting facilities for motor vehicles.
That of course will make yourself you have to spend money that is not small because painting motorcycles require a very expensive cost, because they are using a compressor.
This time, there are easy tips to paint the motor using pylox. You can also do it yourself at home and only spend a lot less money.
However, the result will not be much different like using a compressor. Immediately, pylox body motor properly and carefully.
In doing this one, it requires expert skill, this is because when in doing paint pylox has more potential and can better look the result well.
Armed with creativity, then the results and forms of paint that will be sprayed can give good results.
How to Paint Motorcycle with Airbrush
Painting the motor by using pylox is a bit of effort, to be able to obtain maximum results.
Of course, you also should be as much as possible to prepare some kinds of tools and materials to paint the motor body with a good and correct pylox. The following describes the steps:
- First, the sandpaper motor body that will be painted using 400-sized sandpaper.
- Use sandpaper that is not too rough and not too smooth also by using water until completely uniform.
- After that, wash with soap or better using a thinner.
- Continue to the drying process, try the motor body to be painted free of dust attached.
- Then, paint by using pylox in accordance with the desired color that has been purchased.
- Note also if the distance between the pylox and body when the painting process is not too close alias far enough and not too far away.
- After the painting process is over, then wait for the result until the paint is dry.
- After the paint has dried, sandpaper again painted with water and soap using fine sandpaper and dry.
- Also use pylox clear for finishing process.
9 easy steps above to paint the motor using the pylox must be done carefully and thoroughly correct so that the results obtained can be much better and more leverage.
By using pylox in painting the motor is already done by many people who only have a mediocre budget. However, it does not matter also because the results obtained will also not be outdone by motor paints that use a compressor.
Keep in mind must be careful and careful that the results do not overwhelm and maximize as you want. In painting with pylox also requires extra patience to reap the results, because the process is quite long.
0 Komentar How to Paint Motorcycle with Airbrush
Posting Komentar